This page offers 7 fixes for startup repair infinite loop in Windows 7, 8, 8.1 and 10, including boot into safe mode for automatic repair, run CHKDSK command to check and fix drive corruption, run bootrec command to rebuild the damaged BCD, run system restore to revert Windows to an earlier normal state, and more. If data was unfortunately erased during the troubleshooting, try EaseUS Data Recovery Wizard to recover data after formatting, deleting, PC resetting, system refreshing, and more.
Fix: Boot into Safe Mode
This is what happens when I start my laptop 1.Windows is Loading Files happens 2. I see the windows is loading (without windows logo) for about 2 sec 3. Startup repair happens I press cancel right away on startup repair to see if it would do anything. Nothing happens. The startup repair window is there and I cant do anything. If 'Startup Repair' cannot fix your PC that is stuck at the 'Windows is loading files' screen, continue to try the 'System Restore' option. Hello, I just upgraded to windows 10 and one of the things that bugs me is the file explorer on task bar load very slow. It takes around 1 seconds to load if I click on the explorer on task bar. However, if I use the win+E button the explorer open. Boot From the Windows 7 DVD. To begin the Windows 7 Startup Repair process, you'll need to boot.
- 1. Insert the disc and reboot the system.
- 2. Press any key to boot from the DVD.
- 3. Choose your keyboard layout.
- 4. Click Repair your computer at the Install now screen.
- 5. Click Troubleshoot.
- 6. Click Advanced options.
- 7. Click Startup Settings.
- 8. Click Restart..
7 Fixes to Stuck in Windows 7 Startup Repair Loop
'My computer keeps running Startup Repair during every startup and I can't boot it normally. I tried running Startup Repair multiple times but I'm still getting the same problem. Startup Repair won't seriously automate repair at all. I got stuck in an infinite loop.'
Follow the fixes to troubleshoot your Windows Startup Repair loop.
Workable Solutions | Step-by-step Troubleshooting |
---|---|
Fix 1. Disable Startup Repair | Restart your computer > wait for your BIOS to complete POST > tapping F8..Full steps |
Fix 2. Run CHKDSK Command | Boot Windows from the bootable device > navigate to 'Repair your computer' option..Full steps |
Fix 3. Run Bootrec | Open Command Prompt > type those following commands..Full steps |
Fix 4. Perform System Restore | Boot Windows from the bootable device > click 'Troubleshoot > System Restore'..Full steps |
Fix 5. Delete Problematic File | Access Command Prompt again and enter the following command: cd C:Windows..Full steps |
Fix 6. Restore Windows Registry | In the Windows Boot Options menu, choose 'Troubleshoot >Advanced Options'..Full steps |
Fix 7. Check Device Partition | In Command Prompt, type bcdedit and press 'Enter'. Find device partition and.Full steps |
1 - Windows 7 Startup Repair Infinite Loop Error Details
Windows Error Recovery
Windows failed to start. A recent hardware or software change might be the cause.
If Windows files have been damaged or configured incorrectly, Startup Repair can help diagnose and fix the problem. If power was interrupted during startup, choose Start Windows Normally.
(Use the arrow keys to highlight your choice.)
Launch Startup Repair (recommended)
Start Windows Normally
Description: Fix problems that are preventing Windows from starting
Startup Repair will fail to load, launch but fail to repair, or run and claim repairs have been executed. Your PC will continue to attempt to endlessly start Startup Repair each boot. In Windows 8, Windows 8.1 and Windows 10 this is called Automatic Repair:
2 - Startup Repair Error Symptoms
Unexpected PC shutdown, virus, malware, driver issues, damaged BDC settings, corrupted boot partition, blue screen of death as well as a black screen of death on reboot, all those factors account for Windows startup problems.
As the 'Windows error recovery' suggests, Start Repair should automatically fix the abnormal Windows startup. However, when you choose the recommended option, you'll only confront 2 facts:
1. Startup Repair takes a fairly long time to load or launch.
2. Startup Repair immediately runs but the repairing process never finishes.
In both situations, on each reboot, your PC will continuously attempt to call Startup Repair for the fix, meanwhile, getting stuck in a Startup Repair loop that never ends
3 - Troubleshoot Windows Automatic Startup Repair Infinite Loop Error with 7 Fixes
A clean Windows installation is a guaranteed fix for Windows Startup Repair taking forever, but it costs a complete data loss. So, is there another option to recover from an infinitely looping Startup Repair without reinstalling Windows?
We gave the possible fixes from easy to complex, from safe to risky. You'd better try them sequentially.
- Important
- The essential tool for most of the fixing methods:
- A corresponding Windows installation media, let it be a bootable USB drive, CD, or DVD disc.
People also ask:
Fix 1. Disable Automatic Startup Repair to Fix Startup Repair Loop
You should try to disable automatic restart, although it could not solve the boot error, it can stop the endless restart.
Step 1. Restart your computer. Resident evil 4 map editor.
Step 2. Wait for your BIOS to complete POST (the screen with your manufacturer logo and/or system information).
Step 3. Quickly begin tapping F8 repeatedly, until you see the list of boot options.
Step 4. Choose 'Disable automatic restart on system failure'.
Step 5. Press 'Enter' and wait for your PC to boot.
Fix 2. Run CHKDSK Command to Check and Repair Drive Errors
This helps check or even repair the drives to tackle with file system corruption.
Step 1. Boot Windows from the bootable device. (If you cannot boot, use Window 7 installation CD.)
Step 2. Navigate to 'Repair your computer' option and select 'Command Prompt'.
Step 3. In the Command Prompt window, type chkdsk /r c: and press 'Enter'. (c represents the drive where Windows is installed)
Step 4. Click 'Y' so that the next time the system restarts, CHKDSK utility can check the disk errors and try to fix them. Restart the system and let CHKDSK check hard drive errors and repair.
If you don't have any technical know-how and want to minimize data risks, using third-party software could be a better choice. The Command line is suitable for computer professionals since wrong commands can cause severe problems. Therefore, we strongly recommend you try an automatic command line alternative.
EaseUS Tools M is a practical computer fixing tool that is safe and light-weighted. It's a perfect alternative to CHKDSK command. Use this one-click tool to solve your computer issues.
To fix file system error or disk error:
Step 1: DOWNLOAD EaseUS Tools M for Free and install it.
Step 2: Open the software and select the 'File showing' option.
Step 3: Choose the drive and wait for repairing. After the operation completes, click the 'View' button to check the drive.
Fix 3. Run Bootrec to Fix Damaged or Corrupted BCD Settings
If the bootloader installation or configuration comes with some errors, the startup repair loop could happen as well. You could solve this error by following the steps below.
Step 1. In the same way to open Command Prompt as the second fix did.
Step 2. In the Command Prompt window, type those following commands and press 'Enter'.
Step 3. Restart the system and let bootrec repair MBR.
Fix 4. Perform System Restore to Solve Windows Startup Repair Loop
The System Protection is enabled by default, you can use it to restore your computer to an earlier state to fix your problem.
Step 1. Boot Windows from the bootable device.
Step 2. Click 'Troubleshoot > System Restore'.
Step 3. Follow the wizard instructions to continue the process. Choose a restore point before the date when the Automatic Startup Repair loop error happened.
Fix 5. Delete the Problematic File to Resolve Startup Repair
Windows Is Loading Files Startup Repair Loop
Buy mac games download. Step 1. Access Command Prompt again and enter the following command:
Step 2. Then, you could see 'Boot critical file c:windowssystem32driverstmel.sys is corrupt.' Type the following command:
Restart your PC. If these steps can not help, try the following troubleshooting steps.
Fix 6. Restore Windows 10 Registry to Fix Repair Loop
Step 1. In the Windows Boot Options menu, choose 'Troubleshoot >Advanced Options>Command Prompt'.
Step 2. In Command Prompt, type the following command in Command Prompt and then hit 'Enter'.
Change your drive letter according to your needs.
Step 3. Type txt to open the file in notepad.
Step 4. Press 'Ctrl + O'. Select 'All files' from file type and navigate to C:windowssystem32.
Step 5. Right-click CMD and select 'Run as administrator'. Type the following command and press 'Enter'.
Step 6. Backup those files by renaming Default, Software, SAM, System and Security files to .bak. Type the following command one by one and hit 'Enter':
Step 7. Restart your PC to check if you have solved the error.
Fix 7. Check Device Partition and Osdevice Partition
Sometimes, if your device partition values aren’t correct, you will get stuck in the startup repair loop. Follow the steps below to check device partition and osdevice partition and fix your error.
Step 1. In Command Prompt, type bcdedit and press 'enter'.
Step 2. Find device partition and osdevice partition values. Make sure their values are correct and set to correct partition.
Windows is preinstalled on C partition only, and the correct value is C. Enter the following commands and press 'Enter' after each one if the value isn’t set to C.
After that, reboot PC and fix the Windows startup repair loop.
Additional Fix - Boot into Safe Mode in Windows 7/8/10
Often booting into Safe Mode and uninstall recently install device drivers or software may fix the Automatic Repair loop error. To boot into Safe Mode of a Windows 7, 8, 8.1, or 10 system, you need to have the original DVD or USB. If you do not have the installation disc, follow the guide from Microsoft to create a Windows Installation Media. Then enter Safe Mode:
Step 1. Insert the disc and reboot the system.
Step 2. Press any key to boot from the DVD.
Step 3. Choose your keyboard layout.
Step 4. Click Repair your computer at the Install now screen. Choose 'Troubleshoot > Advanced options >StartupSettings'.
Choose a Safe Mode option (Safe Mode, Safe Mode with Networking, and Safe Mode with Command Prompt) to enter.
How to Recover Data After Fixing Startup Repair Infinite Loop
Besides a clean install of the Windows operating system, the fixes for users to get rid of an endless startup repair loop including system restore and PC factory resetting will also result in part of computer data loss.
It's not the end of the day and a third-party data recovery tool perhaps can salvage your data. For example, EaseUS Data Recovery Wizard is able to recover data after formatting, deleting, PC resetting, system refreshing, and more. And You deserve a try for its data recovery software and see if the software really helps find your lost data.
Step 1. Select a partition. Open EaseUS Data Recovery Wizard, and you can view all of the drives. Select the target partition and click the 'Scan' button to start.
Step 2. Scan the partition. Once you click the 'Scan' button, the process begins immediately. The time required varies, mainly depending on file size and disk health.
Step 3. Recover the lost data. Before recovery, you can right-click the object file, and choose to preview first. Then, click the 'Recover' button as long as you have selected the wanted files. You need to save the recovered files to another safe place to avoid data overwriting.
You get 7 ways to get rid of the Startup Repair Windows 7 loop, no matter whether you have an installation disc or not. Don't worry if the windows 7/8/10 startup repair is taking forever and you cannot stop or cancel it. Also, you can get back lost data after you have fixed the error with EaseUS data recovery software.
Is any folder loading very slowly on your Windows 10 device? If it is, then there are a huge number of reasons to blame, starting from a huge number of files in the folder to low free space in Local Disk C, low memory, etc. But, don’t worry. There are quite a few easy fixes available to decrease the loading time. But before going ahead for the main solutions try out these workarounds first and if these don’t work out, go for the main solutions-
Workarounds–
1. Check if there is enough storage in Local Disk C: (or wherever Windows is installed on your computer).
2. Stop any unnecessary background tasks which take a huge amount of disk processing power (like- antivirus). Further, check the loading time of the folder.
If any of the workarounds didn’t do the trick, go for these solutions-
Fix-1 Change the customization of the folder-
A wrong customization parameter can significantly influence the loading time of a folder.
1. Go to the location of the folder which is loading slowly.
2. Now, right-click on the folder and click on properties.
3. At first, go to the “Customize” tab.
4. Now, under ‘Optimize this folder for:‘ section, click on the drop-down and select “General items“.
5. Don’t forget to check the option “Also apply this template to all subfolders“.
6. Finally, click on “Apply” and then on “OK” to save the changes on your computer.
Close File Explorer window.
Open File Explorer again and navigate to the folder location.
If it still loads very slowly, go for the next solution.
Fix-2 Restart File Explorer-
Restarting File Explorer can be a quick workaround for the problem.
1. Right-clickon the Taskbar and then in the elevated window, click on “Task Manager“.
2. Now, scroll down and right-clickon the “File Explorer” process.
3. Then, click on “Restart” to restart the process.
File Explorer process will be stopped and started again.
Go to the problematic folder and check out the change in loading time.
Windows Is Loading Files Startup Repair Loop Windows 10
In case the problem returns, go for the next fix.
Fix-3 Disable Windows Search from Startup-
Disabling Windows Search from ‘Services‘ of System Configuration window may do the trick.
1. Search for “System Configuration“. Adobe premiere pro cs5 mac free full download.
2. Then, you need to click on the “System Configuration” from the search result.
3. In the System Configuration window, go to the “Services” tab.
4. Now, click on the ‘Services‘ parameter at the top of the services list, to list all the services in descending order of alphabetical series.
5. Now, scroll down to find and uncheck the service “Windows Search” to disable it on your computer.
Windows Startup Files Windows 10
6. Finally, click on “Apply” and then on “OK“. This will save this small change on your system.
Reboot your computer to let the changes take effect.
Upon restarting your computer, Windows Search will be disabled.
After rebooting, open the problematic folder on your computer. It should load faster than before.
Fix-4 Empty Quick Access history-
If a huge number of files or folders are listed in the Quick Access section then it can increase the overall loading time.
1. Press Windows key + E to open the File Explorer window.
Windows Is Loading Files Startup Repair Software
2. In File Explorer window, on the left-hand side, right-click on “Quick access“. Then, click on “Options“.
3. In the Folder Options window, go to the “General” tab.
4. In the Privacy section, click on “Clear” to empty the file explorer history.
5. After clearing the history, click on “Apply” and then on “OK” to save the changes.
6. Now, click on view tab.
7. Now, locate and check option saying locate folder windows in a separate process.
8. Click on OK and then Apply and close the window.
Now, try to open the problematic folder location.
Check the difference in loading time. It should load faster than before.
Fix- 5 Empty AutomaticDestinations folder-
If there are unnecessary numbers of temporary files present in your computer it can slow the loading process of a bulky folder. To delete temporary files follow this process-
1. Press Windows key+R. This will pop up a Run terminal.
2. In Run window, copy-paste this folder location and hit Enter to go to the AutomaticDestinations folder.
3. In the AutomaticDestinations folder, select all of the items at once and press the ‘Delete‘ button from your keyboard to empty the folder.
Once you have emptied the folder, close the File Explorer window.
Open File Explorer again and navigate to the problematic folder location. It should load way faster than before.
Fix-5 Empty Quick Access history-
If a huge number of files or folders are listed in the Quick Access section then it can increase the overall loading time.
1. Press Windows key + E to open the File Explorer window.
2. In File Explorer window, on the left-hand side, right-click on “Quick access“. Then, click on “Options“.
3. In the Folder Options window, go to the “General” tab.
4. In the Privacy section, click on “Clear” to empty the file explorer history.
5. After clearing the history, click on “Apply” and then on “OK” to save the changes.
Now, try to open the problematic folder location.
Check the difference in loading time. It should load faster than before.
Fix-6 Change folder attributes
1. Go to the location of the folder which is loading slowly.
2. Now, right-click on the folder and click on properties.
3. Click on advanced.
4. Now, uncheck the option saying Allow files in this folder to have contents indexed.
5. Click ok OK.
Your issue should be fixed.
Sambit is a Mechanical Engineer By qualification who loves to write about Windows 10 and solutions to weirdest possible problems.